Product description

Why the GOAT cannot be connected to the network？

1. Ensure you're using a 2.4GHz network with Bluetooth ON.

2. Move the robot closer to the router for a stronger signal.

3. Follow the guide: Press and hold the charging button until the countdown ends.

Tip: Restart the GOAT if the issue persists.

How do I install the trimmer module?

Use the 3 included screws (2 spare, 1 pre-installed). A PH2 Phillips screwdriver (>10 cm) is recommended. Open the side rubber cap to access holes and adjust the angle slightly if alignment is tight.

How do I start a trimming task?

Two ways to start trimming:

• Manual: Select Trim mode in the app, choose boundary, tap start.

• Schedule: Set a fixed time in Schedule for automatic start.

Note: Trimming is louder than mowing—schedule during daytime to avoid disturbing neighbors.

Why does the trimmer module scrape against edges or corners?

For smooth trimming:

• Clear boundary obstacles to keep vision unobstructed.

• Avoid edges with 5–7 cm (2–3 in) steps to prevent sticking.

• Map sharp corners slightly inward so GOAT can cut close to edges while reducing contact with walls or rocks.

What if the trimmer line is not tangled?

• Manual Release: Press the button on the trimmer cover to pull out a line segment.

• Mapping Tip: Map sharp corners slightly inward to reduce collisions with walls or rocks and prevent line snapping.

From the brand